Trolley Lifts are suitable for larger loads of up to 300kg, transported on trolleys or in roll cages. They are typically used for moving larger loads and are designed to help avoid excessive manual handling. TROLLEY LIFTS 100 to 300 Kgs
Capacity 100 – 300 kg
Car width: 400 to 1000 mm
Car depth: 400 to 1000 mm
Car height: 600 to 2000mm
Up to 3 entrance sides
Landing doors are hinged or shutter type.
Doors are at floor height or can be set to any serving height.
Motor position is at the top, inside the lift shaft.
Nominal speed from 0,2 to 1.0 m/s
Optionally safety gear for when there is accessible space below the shaft.
Motor room can be at the side of the lift shaft, at any floor.
Rated power max. 1.5 kW (Top or bottom drive) 3.0 kW (Side drive)
Car and Landing doors can be Primed for painting by the customer,
Galvanised Steel, Stainless Steel or Powder Coated to any shade.
Galvanized self supporting structure for quick and easy installation
Motor with compact worm gear
Plug-and-play controls, completely pre-wired, low voltage engineering
Call and send control with floor position indicator
Call acknowledgement and arrival buzzer
Fault Diagnostic system
Full documentation, operation manual, engineers drawing plus CE Marking.
Up to 30 floors / stops
Travel up to 120 m
Shaft doors fire-rated acc. EN 81-58 (E120, EW60, EI90)
VVVF drive
Car and shelf heaters
LED car lighting
LED shaft lighting
Overload device
Intercoms
Ship and offshore lifts
Water/dust protection (IP)
Copyright 2015 Service Lifts. All Rights Reserved.